AEG X92384MI0 Manual do Utilizador descarregar pdf (Página 18)

EN - INSTALLATION

FLUE ASSEMBLY - MOUNTING THE HOOD BODY

•Position the upper chimney section and fix the

upper part to the frame using the 2 screws 12c

(2,9 x 6,5) provided.

•Similarly,positionthelowerchimneysectionand

fix the lower part to the frame using the 2 screws

12c (2,9 x 6,5) provided.

Before fixing the hood body to the frame:

•Screwthe2screws12f half way into the holes

provided in the sides of the bottom of the frame.

•Removethegreasefiltersfromthehoodcanopy.

•Removeanyactivatedcharcoalfilters.

•Liftthehoodcanopyandengagethescrews12f

in the slots (A) as far as they will go.

•Workingfrombelow,fixthehoodcanopytothe

frame (B), using the 4 screws 12q and 4 washers

22 provided, then tighten all the screws securely.

ELECTRICAL CONNECTION

•Connectthehoodtothemainsthroughatwo-

pole switch ha-ving a contact gap of at least 3

mm.

•Removethegreasefilters(seeparagraphMainte-

nance) being sure that the connector of the feed-

ing cable is correctly inserted in the socket placed

on the side of the fan.

•ConnectthecontrolconnectorCmd.

•ConnectthelightsconnectorLux.

•Placetheconnectorsinthejunctionbox24 and

close it using the 2 screws 12e (2,9 x 9,5) pro-

vided.

•Fixthejunctionboxtothehoodbodyusingthe2

screws 12c (2,9 x 6,5) provided.

•Fortherecirculationversion,fittheactivatedcar-

bon odour fil-ter.

•Replacethegreasefilters.























1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 75 76

Comentários a estes Manuais

Sem comentários

AEG X92384MI0 Manual do Utilizador Página 18

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões AEG X92384MI0