AEG X92384MI0 Manual do Utilizador descarregar pdf (Página 17)

EN - INSTALLATION

CONNECTION IN DUCTING VERSION

When installing the ducting version, connect the

hood to the chimney using either a flexible or rigid

pipe ø 150 or 120 mm, the choice of which is left

to the installer.

To install a ø 150

•Toinstallthedumper10.

•Fixthepipeinpositionusingsufficientpipeclamps

(not supplied).

To install a ø 120

•Toinstallaø120mmairexhaustconnection,insert

the reducer flange 9 on the dumper 10.

•Fixthepipeinpositionusingsufficientpipeclamps

(not supplied).

•Removeanyactivatedcharcoalfilters.

CONNECTION CONTROL GROUP

•UnscrewthescrewsneartheAiroutletandusethese

for attaching the Control Group 50.

•Connectupalltheconnectorstothesocketsprovi-

ded on the Control Board Unit, making sure they are

compatible.

CONNECTION IN RECYCLING VERSION

•InserttheConnectorextensions14.1 into the side of

the Connector 15.

•InserttheConnector15 into the Support bracket 7.3

and fix it with the screws.

•FastentheSupportbracket7.3, fixing it to the upper

part with the Screws.

•MakesurethattheConnectorextensionsoutlet14.1

is in correspondence with the Chimney openings both

horizontally and vertically.

•Join the Connector 15 to the Hood canopy outlet

us-ing a rigid or flexible pipe ø¸150 mm, selection of

which is at the discretion of the installation techni-

cian.

•MakesurethattheActivatedcharcoalodourfilterhas

been fitted.































1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 75 76

Comentários a estes Manuais

Sem comentários

AEG X92384MI0 Manual do Utilizador Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões AEG X92384MI0