AEG KVH 32 Guia do Utilizador descarregar pdf (Página 54)

2. If you are using HyperTerminal, open it and

establish the following settings:

• Bits per second: 9600

• Data bits: 8

• Parity: None

• Stop bits: 1

• Flow control: None

If you are using the KVH Flash Update Wizard,

double-click the “KVH Flash Update Wizard”

shortcut on your computer’s desktop to start the

wizard. You do not need to flash the antenna to view

diagnostic readouts; you will simply view the data in

the “TracVision Antenna Comms” window.

3. Apply power to the TracVision R5/R4 system and

allow the system to complete full initialization.

Observe the data scrolling on the PC display to

identify any system problems detected. If no data

is seen, recheck your connections and setup.

4-6

A Guide to TracVision R5/R4

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60 61

Comentários a estes Manuais

Sem comentários