
5.11 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: the hob must
be deactivated. Touch for 4 seconds
until flashes. Touch . comes on
for 4 seconds.
To deactivate the function: the hob
must be deactivated. Touch for 4
seconds until
flashes. Touch .
comes on for 4 seconds.
To override the function for only one
cooking time: activate a cooking zone.
comes on. Touch for 4 seconds
until comes on for all zones. Set the
heat setting in 4 seconds. You can
operate the hob. When you deactivate
the appliance the function operates
again.
5.12 OffSound Control
(Deactivation and activation of
the sounds)
Deactivate the hob. Touch for 3
seconds. Touch for 3 seconds. or
comes on. Touch of the timer to
choose one of the following:
• - the sounds are off
• - the sounds are on.
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to you can
hear the sounds only when:
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
5.13 Power management
function
• All cooking zones are connected as
on the illustration.
• The hob and both ovens are
connected to one phase.
• The phase has a maximum electricity
load.
• The function divides the power within
the appliance. The oven is more
important than the hob.
• The function activates when the total
electricity load in the appliance is
exceeded.
• The function decreases the power on
the cooking zones to prevent a circuit
overload.
• The heat setting display of the
reduced zones changes between two
levels.
6. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with suitable
cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
bottom (with a correct marking from a
manufacturer).
ENGLISH 13
Comentários a estes Manuais