AEG FM4360GAN Manual do Utilizador descarregar pdf (Página 24)

To optimise joints between the installed hobs, the gap between the ceramic hob

may be grouted with silicone:

1. Remove the aluminium panels from the hobs.

2. Apply a stripe of silicone to the gap between the two ceramic hob. Use only

the silicone supplied, as it is designed to tolerate the appliance’s high temper-

ature. (Fig. 1)

3. Splash a little soapy water (washing-up liquid) on the silicone stripe

4. Press the rubber block hard against the ceramic hob and pull it slowly from

back to front (Fig. 2)

5. Leave the silicone to harden until the next day.

6. Remove surplus silicone coating from the ceramic hob with the razorblade

supplied. Be careful not to damage the silicone in the gap. Run tools only

along the joint, never across it.

7. Polish the ceramic hob with the supplied cleaning product for ceramic hobs.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Sem comentários

AEG FM4360GAN Manual do Utilizador Página 24