AEG 6530DG-M Manual do Utilizador

1INSTRUCTION- ANDINSTALLATION BOOK6530 DG-m AUS/NZL 949600259GB

10 Cleaning and maintenance For reasons of hygiene and safety, the cooking zones must be kept clean. Grease sta

11Stainless steel surfacesPerform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in

12Cleaning of gas burnersClean the control panel and knobs plus the pan grid, as well as burner caps and rings, with ordinary cleansing agents.Never u

13This appliance must be installed by anauthorised person. This appliance shall be installed inaccordance with the manufacturer'sinstallation ins

14Any adjoining wall surface situatedwithin 200 mm from the edge of anyhob burner must be a suitable noncombustible material for a height of 150 mm fo

15Fixing* Prepare the cut out according to the "cut out measurements”.* Drop the outer housing into the bench top and fix down with

16Before leavingThe pipe connections should bechecked for leaks with soap andwater. Do not use a naked flamefor detecting checks.Test all burners on h

17Technical dataRadio-noise reductionThis unit observes the current EEC-directive on radio noise reduction.Material: Stainless steel, ceramicglassPan

18ServiceSympton: There is no spark when lighting the gas?When the operating knob is released the gas ring goes out again?The gas ring burns very unev

20325 88-4700 Rev. 5-150

2Congratulations from AEGDear Customer,Congratulations with your new Hob.It is important that you become familiar with the functions and features of t

3Contents Page noFor the userYour new aplliance ... 2Safety inform

4Safety informationThese warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the applia

5ServiceRepairs carried out by inexperienced persons may cause injury or serious malfunction of the appliance. Repairs must only be carried out by a a

6Description of the productGuide pins for gridBurnerControl knobOuter housing(supplied in separate box)Air intake

7Burner markingsSymbols at each control knob indicates which burner is adjusted with the control knob.Front BurnerBack burnerPanel markingsEach contro

8Together with the burner ring the burner ring/cover forms a space where the final mixture of gas and air takes place in order to make the gas burn co

91. Depress and turn the control knob for the burner to the left to max. flame . (Ignition position)2. The ignition electrode will emit