AEG LAV88830-W Manual do Utilizador descarregar pdf (Página 35)

Instructions for use

Remnants of detergent

are building up in the

detergent drawer.

Water valve not fully opened. Open the water valve fully.

Filter in the screw connec-

tion of the intake hose on

the water valve or on the

unit is blocked.

Close the water valve. Un-

screw the intake hose from

the water tap and from the

unit. Clean the filter.

The rinsing water is

murky.

The cause is probably a de-

tergent with a high silicate

content.

No negative influence on the

rinsing result, possibly use

liquid detergent.

No illumination when

pressing an additional

program.

The selected additional pro-

gram cannot be combined

with the set program.

Make another selection.

Only the END (EINDE)

control panel label is il-

luminated.

The washing machine is in

the stand-by mode.

Press any button.

Only the RUN TIME

(LOOPTIJD) control

panel is illuminated, a

number between 1 and

19 is shown in the RUN

TIME (LOOPTIJD) dis-

play.

The start time preselection is

counting, the washing ma-

chine is in the stand-by

mode.

If you press any button the

machine will leave stand-by

mode.

The program sequence

indicator flashes con-

stantly.

Program saving switched on;

the program selector was ac-

cidentally readjusted during

the washing cycle.

Turn the program selector

back to the original position

(see "Program Saving“).

Problem Possible Cause Remedy

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 55 56

Comentários a estes Manuais

Sem comentários

AEG LAV88830-W Manual do Utilizador Página 35

Comentários a estes Manuais

Manuais e produtos relacionados com não AEG LAV88830-W