AEG HKL85416IB Manual do Utilizador descarregar pdf (Página 19)

One-phase connection - 230 V~ Two-phase connection - 400 V 2 ~ N

L Black and brown Black L1

Brown L2

8.4 Attaching the seal to the

rabbet

1. Clean the rabbets in the worktop.

2. Cut the supplied seal stripe into 4

stripes. The stripes must have the

same length as the rabbets.

3. Cut the ends of the stripes at an

angle of 45°. They should fit in the

corners of the rabbets accurately.

4. Attach the stripes to the rabbets. Do

not extend the stripes. Do not bond

ends of stripes one over another.

After you assemble the hob, seal the

remaining gap between glass ceramic

and the worktop with silicone. Make sure

the silicone does not get under the glass

ceramic.

8.5 Assembly

min.

50mm

min.

500mm

min.

2mm

min. 2 mm

12 mm

28 mm

38 mm

57 mm

41 mm

31 mm

min

30 mm

min. 500 mm

< 20 mm

> 20 mm

min. 2 mm

12 mm

28 mm

38 mm

57 mm

41 mm

31 mm

min. 500 mm

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 71 72

Comentários a estes Manuais

Sem comentários

AEG HKL85416IB Manual do Utilizador Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões AEG HKL85416IB