AEG HK953400FB Manual do Utilizador descarregar pdf (Página 8)

Display Description

The automatic switch off is on

OptiHeat Control (3 step Residual heat indicator)

WARNING!

\ \ Risk of burns from residual heat!

OptiHeat Control indicates the level of the residual heat. The induction cooking zones make

the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic

is slightly heated by the residual heat of the cookware.

Operating the appliance

On and Off

Touch for 1 second to start or stop the appliance.

Automatic Switch Off

The function stops the hob automatically if:

• all cooking zones are off.

• you do not set the heat setting after you start the hob.

• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.

The sound operates until you remove the object.

• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again, the

cooking zone must be cool.

• you use incorrect cookware.

comes on and after 2 minutes the cooking zone stops

automatically.

• you do not stop a cooking zone or change the heat setting. After some time

comes

on and the hob stops. See the table.

Automatic Switch Off times

Heat setting

1-3 4-6 7-8 9-14

Stops after

6 hours 5 hours 4 hours 1.5 hours

The heat setting

Touch the control bar at the necessary heat set-

ting. Change to the left or the right, if it is neces-

sary. Do not release before you have a correct heat

setting. The display shows the heat setting.

Operating the appliance

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

AEG HK953400FB Manual do Utilizador Página 8