Aeg HC452600EB Manual do Utilizador descarregar pdf (Página 13)

• Make sure that there is an access to

the mains plug after installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

• The appliance must not be connected

with an extansion cable, an adapter or

a multiple connection (risk of fire).

Check that the ground connection is

in conformity with the standard and

regulations force.

• The power cable must be placed in

such a way that it does not touch any

hot part.

• Connect the appliance to the mains

with a device that lets to disconnect

the appliance from the mains at all

poles with a contact opening width of

minimum 3 mm, eg. automatic line

protecting cut-out, earth leakage trips

or fuse.

• None of a parts of the connection ca-

ble can not get a temperature 90°C.

8.5 Replacement of the

connection cable

In order to replace the connection cable

speak your local Service Force Centre!

To replace the connection cable use on-

ly H05BB-F Tmax 90°C (or higher) type.

Make sure that the cable section is appli-

cable to the power and the working tem-

perature. The yellow/green earth wire

must be approximately 2 cm longer than

all phase wires.

8.6 Assembly

min.

450mm

min.

650mm

340

+1

mm

490

+1

mm

R 5mm

55mm

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comentários a estes Manuais

Sem comentários