AEG C88900K-MN Manual do Utilizador

88900KCeramic glass induction hobGlasskeramisk induksjonsplatetoppInstallation and Operating InstructionsMontasje- og brukerveiledning

10The Digital DisplaysDigits 1 to 9 and four different letters can appear in the display.• The digits show the heat setting selected.1 = Lowest capaci

111 Cooking Zone Safety Cut-outIf one of the cooking zones is not switched off after a certain time or if the heat setting is not changed, the corresp

12Function and the Way the Induction Cooking Zone WorksA copper wire induction coil is beneath the ceramic glass cooking sur-face. This generates elec

13Suitable Kitchenware for Induction Cooking ZonesPots and Pans• In principle all pots and pans with magnetic bases are suitable. These are steel, ste

14Pan SizeUp to a certain limit the induction cooking zone adapts itself to the size of the pan base diameter. However, the pan base diameter must be

15Before Using for the First TimeInitial CleaningWipe the ceramic glass surface with a damp cloth.1 Important: Do not use any caustic, abrasive cleane

16Switching Off the ApplianceTo switch off the appliance completely activate the “On/Off” I sensor field.Touch the “On/Off” sensor field for approx. 1

17Heat Setting SelectionFor setting and adjusting the heat setting (1 to 9) for the selected cooking zone. Use sensor field + to increase the heat set

18Activating the Power FunctionUsing the power function you can increase the power of both front cooking zones for 10 minutes.With this function you c

19Activating the Warming Zone1. Touch the “Activate” sensor field for approx. 2 seconds. The control in-dicator lights up. 2. Within 10 seconds, touch

2Dear customer,Please read these operating instructions carefully.Pay particular attention to the section “Safety information” on the first few pages.

20Switching off a Cooking Zone1. Select the required cooking zone with the cooking zone sensor fields.2. Touch sensor fields + and - simultaneously to

21Cooking with the Automatic Heating-Up FunctionAll four cooking zones of the cooking field can be controlled in nine stages and have an automatic hea

22a lights up in the heat setting display. 3. Next, touch the sensor field - and set the required continued heat set-ting 1 to 8. The heat setting sel

23Cooking without the Automatic Heating-Up Function1. For heating up/browning, select a high power.2. As soon as steam forms or the fat is hot, switch

24Locking/Unlocking the Control PanelWith the exception of the “On/Off” sensor field the control panel can be locked at any required time during cooki

25TimerA cooking duration can be set with the integrated timer for all cooking zones. When the end of the cooking duration is reached, the cooking zon

263 To set the timer more quickly, leave your finger on the + or - sensor field until the required time is reached.If the - sensor field is operated f

27Uses, Tables and TipsAdvice on Cooking with and without Automatic Warm upThe automatic warm up function is suitable for:• dishes that start off cold

28TablesNote:The figures given in the following tables are for guidance. The switch setting required for cooking depends on the quality of the pots an

29Chart for the Automatic Heating-Up FeatureHeat settingCooking processesExample foods Duration Notes/tipsA7 to A8Heavy browningSteaksper pan 8-20 min

3ContentsOperating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Safety . . . . . . . . . . . . . . . . . . .

30Cleaning and CareAdvantages for Cleaning and Caring for the Induction Cooking Zone2 The cleaning effort for induction ceramic glass cooking surfaces

31Stubborn Soiling1. To remove food that has boiled over or stubborn splashes, use a glass scraper. 2. Place the glass scraper at an angle to the cer

32What to do if …Rectifying faultsIt is possible that faults have been caused by a minor error, which you can correct yourself with the help of the fo

33… the cooking zones will not switch on.Check whether – the operating panel is locked (see chapter “Locking the operating panel”).– a period of more

34… _ appears on the displayCheck whether – the cooking zone has overheated.switch off the appropriate cooking zone and let it cool down. Try switchin

35Installation Instructions1Important! The new appliance may only be installed and connected by qualified personnel.Please observe this instruction, o

36Regulations, Standards, DirectivesThis appliance meets the following standards:• EN 60 335-1 and EN 60 335-2-6relating to the safety of electrical a

371 Safety Instructions for the Installer• A device must be provided in the electrical installation which allows the appliance to be disconnected from

38Electrical ConnectionBefore connecting, check that the nominal voltage of the appliance, that is the voltage stated on the rating plate, corresponds

39ServiceIn the “What to do if …” section a number of malfunctions are listed that you can rectify yourself Look there first if a fault occurs. Is it

4Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Technical Data . . . . . . . . . . . . . . . . . .

76Assembly / Montasje

77

78

79

From the Electrolux Group. The world´s No.1 choice.The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning an

5Operating Instructions1 SafetyThe safety aspects of this appliance comply with accepted technical standards and the German Appliance Safety Law. Howe

6Safety During Use• This appliance may only be used for normal cooking and frying in the home. It is not designed for commercial or industrial purpose

7To Avoid Damaging Your Appliance• Do not use the hob as a work surface or for storage.• Do not operate the cooking zones when there is no pan or the

82 DisposalDisposing of the packaging materialAll materials used can be fully recycled.Plastics are marked as follows:• >PE< for polyethylene, a

9Description of the ApplianceCooking zones and control panel Induction cooking zone1800 WInduction cooking zone 2200 Wwith power function 3000 WTouch-