AEG 35772G-M Manual do Utilizador descarregar pdf (Página 16)

Fitting the Hob into the worktop

Carry out the building in of the hob as follows:

 put the seals

supplied with the hob, on

the edges of the cut out:

place them exactly on the

front and rear edge and at

50 mm. from the side

edges, as shown in the

diagram, taking care that

the seals meet without

overlapping;

 place the hob in

the cut out, taking care that

it is centred;

 fix the hob with the

relevant fixing clamps

and screws, as shown in

the diagram.

When the screws have been tightened, the excess seal can be removed.

The edge of the hob forms a double seal which prevents the ingress of liquids.

50 50

FO 2039

FO 0199

Seal

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

AEG 35772G-M Manual do Utilizador Página 16