AEG F88742M0P Manual do Utilizador

EN User ManualDishwasherF88742M0P

6. SETTINGS6.1 Programme selectionmode and user modeWhen the appliance is in programmeselection mode it is possible to set aprogramme and to enter the

Whether you use a standard detergentor multi-tabs (with or without salt), setthe proper water hardness level tokeep the salt refill indicator active.M

• The indicators , and go off.• The indicator continues to flash.• The display shows the currentsetting: = the rinse aid emptynotification is acti

of this option, the duration of someprogrammes, water consumption andthe last rinse temperature can beaffected.The XtraDry option is a permanentoption

8.1 The salt containerCAUTION!Only use salt specificallydesigned for dishwashers.The salt is used to recharge the resin inthe water softener and to as

• If the salt indicator is on, fill thesalt container.• If the rinse aid indicator is on, fillthe rinse aid dispenser.3. Load the baskets.4. Add the d

CAUTION!Do not try to close theappliance door within 2minutes after AirDryautomatically opens it, asthis may cause damage tothe appliance. If, afterwa

detergent residues on the tableware,we recommend that you use thetablets with long programmes.• Do not use more than the correctquantity of detergent.

11.1 Cleaning the filtersThe filter system is made of 3 parts.CBA1. Turn the filter (B) counterclockwiseand remove it.2. Remove the filter (C) out of

11.2 Cleaning the upper sprayarmWe recommend to clean regularly theupper spray arm to avoid soil to clog theholes.Clogged holes can cause unsatisfacto

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS.

With some problems, the displayshows an alarm code.The majority of problems that canoccur can be solved without the needto contact an Authorised Servi

Problem and alarm code Possible cause and solutionSmall leak from the appli-ance door.• The appliance is not levelled. Loosen or tighten the ad-justab

Problem Possible cause and solutionThere are stains and dry waterdrops on glasses and dishes.• The released quantity of rinse aid is not sufficient. A

Problem Possible cause and solutionDull, discoloured or chippedtableware.• Make sure that only dishwasher-safe items are washedin the appliance.• Load

www.aeg.com/shop117888840-A-242016

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f

• Put knives and cutlery with sharp points in the cutlerybasket with the points down or in a horizontalposition.• Do not keep the appliance door open

• The water inlet hose has a safety valveand a sheath with an inner mainscable.WARNING!Dangerous voltage.• If the water inlet hose is damaged,immediat

3. PRODUCT DESCRIPTION65911 10 7812 13 34211Worktop2Top spray arm3Upper spray arm4Lower spray arm5Filters6Rating plate7Salt container8Air vent9Rinse a

4. CONTROL PANEL12 4 568371On/off button2Program button3Programme indicators4Display5Delay button6Option button7Indicators8Start button4.1 IndicatorsI

5. PROGRAMMESProgramme Degree of soilType of loadProgramme phases Options 1)• Normal soil• Crockery and cut-lery• Prewash• Wash 50 °C• Rinses• Dry• Sa

Programme Degree of soilType of loadProgramme phases Options 6)• Normal soil• Crockery and cut-lery• Prewash• Wash 50 °C• Rinses• Dry• XtraDry1) With