AEG L87695WD Manual do Utilizador descarregar pdf (Página 4)

• Do not install the appliance behind a

lockable door, a sliding door, a door

with a hinge on the opposite side in

such a way that a full opening of the

door is restricted.

• Fabric softener or equivalent products

must be used as specified by the fab-

ric softener manufacturer.

• Obey the safety instructions on the

detergent packaging to prevent burns

to eyes, mouth and throat.

• Plastic items are not heat resistant.

– If you use a detergent ball, remove

it before you set the drying pro-

gramme.

– Do not use a detergent ball when

you set a non-stop programme.

WARNING!

Risk of explosion or fire.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

if it is not possible to avoid it, fully

rinse with extra water items cleaned

with flammable products.

• To prevent from the risk of self com-

bustion do not stop the drying pro-

gramme before the end of the drying

cycle unless all items are quickly re-

moved and spread out so that the

heat is dissipated.

WARNING!

Risk of burns!

• When you interrupt the drying pro-

gramme, the laundry and the drum

may be hot. Remove the laundry care-

fully.

• Do not touch the glass of the door

while a programme operates. The

glass can be hot.

1.4 Care and Cleaning

WARNING!

Risk of injury or damage to the

appliance.

• Before maintenance, deactivate the

appliance and disconnect the mains

plug from the mains socket.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal ob-

jects.

1.5 Installation

• Remove all the packaging and the

transit bolts.

• Keep the transit bolts. When you

move the appliance again you must

block the drum.

• Do not install or use a damaged appli-

ance.

• Do not install or use the appliance

where the temperature is less than 0

°C or where it is exposed to the

weather.

• Obey the installation instruction sup-

plied with the appliance.

• Make sure that the floor where you in-

stall the appliance is flat, stable, heat

resistant and clean.

• Do not install the appliance where the

appliance door can not be fully

opened.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Make sure that there is air circulation

between the appliance and the floor.

• Adjust the feet to have the necessary

space between the appliance and the

carpet.

Water connection

• Make sure not to cause damage to the

water hoses.

• The appliance is to be connected to

the water mains using the new sup-

plied hose-sets. Old hose sets must

not be reused.

• Before you connect the appliance to

new pipes or pipes not used for a long

time, let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

Electrical connection

WARNING!

Risk of fire and electrical shock.

4

www.aeg.com

1 2 3 4 5 6 7 8 9 ... 83 84

Comentários a estes Manuais

Sem comentários