Aeg L61470WDBI Manual do Utilizador

LAVAMAT 61271 WDBIEN WASHER DRYER USER MANUAL

• after pressing button 8: it will be impos-sible to change any other programmeor option.To enable or disable this option press si-multaneously for ab

WASHING PROGRAMMESProgrammeMaximum and Minimum TemperatureType of LaundryMaximum LoadCycle De-scriptionOptionsCottons95° - 30°Max. load 7 kg - Reduced

ProgrammeMaximum and Minimum TemperatureType of LaundryMaximum LoadCycle De-scriptionOptionsWool/Silk 30° - ColdMax. load 2 kgMachine washable wool as

ProgrammeMaximum and Minimum TemperatureType of LaundryMaximum LoadCycle De-scriptionOptionsCotton Economy60°Max. load 7 kgWhite and fast coloured cot

CONSUMPTION VALUESProgramme Energy con-sumption(KWh)Water con-sumption(litres)Programmeduration(minutes)White Cottons 95° 2.2 72For the dura-tion of t

Make sure that no laundry stays betweenthe seal and the door. There is a risk ofwater leakage or damage to the laundry.FILLING THE DETERGENT AND ADDIT

= Reset programme / switching OFFof the machineIf you turn the programme dial toanother programme when the ap-pliance is working, the yellow pilotlig

SETTING THE DELAY START(BUTTON 9)Press this button again an again to set therequired delay.The display shows the set delay time val-ue (up to 20 hours

must be emptied out before opening thedoor. During this time the drum continuesto turn at regular intervals until waterdrain.Follow the below instruct

DAILY USE - DRYINGDRYING ONLYThe recommended load size is 3 kg forcottons and linen, and 2 kg for syntheticitems.It is also possible to dry up to 4 kg

CONTENTS4 SAFETY INFORMATION5 TECHNICAL INFORMATION7 PRODUCT DESCRIPTION8 CONTROL PANEL11 WASHING PROGRAMMES13 DRYING PROGRAMMES14 CONSUMPTION VALUES1

a drying time therefore saving en-ergy. In any case the lowest valuesyou can select are 900 r.p.m. forcottons and synthetics and 700r.p.m. for delicat

HELPFUL HINTS AND TIPSTHE LAUNDRY LOAD• Divide the laundry in: white, coloured,synthetics, delicates and wool.• Obey the washing instructions that are

Level TypeWater hardness°dH °T.H. mmol/l Clarke2 medium 8-14 16-25 1.6-2.5 10-163 hard 15-21 26-37 2.6-3.7 17-254 very hard > 21 > 37 >3.7 &g

CARE AND CLEANINGWARNING!Disconnect the appliance from the mainssupply before you clean it.DESCALINGThe water we use contains limescale. If itbecomes

MAX3.Remove the top part of the liquid ad-ditive compartment.4.Clean all the parts with water.5.Clean the dispenser recess with abrush.6.Put back the

5.When no more water comes out, un-screw the pump cover (A) by turningit anti-clockwise and remove the fil-ter. Use pliers, if necessary.Always keep a

To clean the water inlet filters:1.Close the water tap.2.Remove the water inlet hose from thewater tap.3.Clean the filter in the inlet hose with astif

TROUBLESHOOTINGCertain problems are due to lack of sim-ple maintenance or oversights, which canbe solved easily without calling out an en-gineer. Befo

Problem Possible cause/SolutionThe machine does notempty and/or does notspin:The drain hose is squashed or kinked. • Check the drain hose connection.T

Problem Possible cause/SolutionThe machine vibrates oris noisy:The transit bolts and packing have not been removed.• Check the correct installation of

FOR PERFECT RESULTSThank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative techn

Problem Possible cause/SolutionThe laundry is full ofdifferent colored fluff:The fabrics washed in the previous cycle released fluffof a different col

INSTALLATIONUNPACKING1.Use the gloves. Remove the externalfilm. If necessary, use a cutter.2.Remove the cardboard top.3.Remove the polystyrene packagi

6.Put one of the polystyrene packagingelements on the floor behind the ap-pliance. Carefully put down the appli-ance with the rear side on it. Makesur

12.Put the plastic caps in the holes. Youcan find these caps in the user man-ual bag.WARNING!Remove all the packaging and thetransit bolts before you

THE INLET HOSE20O20O20O45O45O45O• Connect the hose to the appliance.Turn the inlet hose only left or right.Loose the ring nut to set it in the cor-rec

With the plastic hose guide. • On the edge of a sink.• Make sure that the plastic guide cannotmove when the appliance drains. At-tach the guide to the

Without the plastic hose guide.• To a sink spigot.Refer to the illustration. Put the drainhose in the spigot and tighten it with aclip. Make sure that

BUILDING INOVERVIEW600 mm555 mm596 mm170 mm75 mm100 mm60 mmmin.820 mmmin.560 mm818 mm• This appliance has been designed tobe built into the kitchen fu

12• HingesTo mount the hinges it is necessary todrill two holes (dia. 35 mm, depth12.5-14 mm depending on the depth ofdoor furniture) on the inner sid

Fig. 7ENGLISH39

SAFETY INFORMATIONBefore the installation and use, read thismanual carefully:• For your safety and the safety of yourproperty• To help the environmen

www.aeg.com/shop 132927190-A-022012

INSTALLATION• The appliance is heavy, be careful whenyou move it.• Do not transport your appliance with-out the transit bolts, you can damageinternal

Electrical connection: VoltageOverall powerFuseFrequency230-240 V2050 W13 A50 HzLevel of protection against ingress of solid particlesand moisture ens

PRODUCT DESCRIPTION7 8 9101 234561Detergent dispenser2Control panel3Door handle4Rating plate5Drain pump6Feet for the appliance level7Water drain hose8

CONTROL PANEL1 2 3 4 5 6 7 98 10ABC1Programme selector dial2SPIN button•Rinse hold position 3STAIN button4TIME SAVE button5EXTRA RINSE button6DRYING T

Alarm codesIn the event of operating problems, some alarm codes can be dis-played, for example (see chapter «Troubleshooting»).End of programmeWhen t